Description

1. Condensation-cure products for general use

2. Putty-like addition-cure products

3. Welder molds - (CONDENSATION-CURE MATERIALS)

4. High Strength Molds (CONDENSATION-CURE MATERIALS)

5. For complex castings (HIGH STRENGTH, ADDITION-CURE)

The Shin-Etsu mold making/tooling materials are well known for their clarity, flexibility, natural release, and low shrinkage. Our materials have been time tested and continue to provide excellent mold making performance. They are resistant against most urethane, epoxies, etc. with an unsurpassed mold life, high strength translucence and ease to work with.

Two-component RTV silicone rubber compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV silicone rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.

Features
Workability
The base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted.

Mold-releasability
The cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.

Dimensional stability
These rubbers offer good dimensional stability, with little shrinkage.
 
Flowability
They have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.

Non-exothermic
No heat is generated during curing, meaning no adverse effects to the original.